HVLP Spray Finishing across the West Midlands
HVLP — High Volume, Low Pressure — is the spray equipment of choice for fine, controlled finishing on furniture, joinery and architectural detail. We use it on every spray project we deliver.
HVLP equipment delivers atomised paint at low pressure, which means dramatically less overspray, a finer finish and better material transfer than conventional spray. On site, this lets us work cleanly inside occupied homes; in the facility it means furniture-grade output on bespoke joinery.
We specify two-pack lacquers, water-based systems and traditional alkyds depending on the brief, and we calibrate the equipment for each material.
- HVLP and AAA spray equipment
- Two-pack, water-based and alkyd systems
- Furniture-grade output on joinery
- Low overspray suitable for occupied homes
How the project runs.
Survey & spec
We confirm substrate, condition, paint system and a clear written programme.
Strip & prep
Doors and panels removed where appropriate. Sanding, degreasing, priming.
Mask & contain
Full sheeting and HVLP-controlled spray means no overspray, no mess.
Spray & denib
Multiple coats with denib between, finished to a furniture-grade surface.
Reinstall & sign-off
Doors rehung, hardware refitted, walked with the client.
Selected projects.
Common questions.
Why HVLP over conventional spray?+
Better material transfer, finer atomisation, dramatically less overspray — and a finer finish on detail surfaces.
Can you spray two-pack on-site?+
Yes, with appropriate ventilation and PPE. Most kitchens we deliver in two-pack are sprayed on-site.
Upload photos for a fast estimate.
Send up to 6 photos of the areas you'd like decorated and we'll come back to you with clear next steps.